How to sew on badges by hand or by machine

If you want to brighten up a piece of clothing, accessory, luggage piece or even hats you can sew on badges to obtain the fresh look easily. Badges or patches when placed strategically can immediately affect the look of a garment or accessory and take it from boring to spunky within just a few minutes. If you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know the way to do it.

To do this procedure of sewing on a badge, begin with placing the badge in the place for which you desire it. Now secure the badge well with some pins to ensure that it stays into position and doesn’t shift while you’re sewing it on. So if you’re putting the patch on a garment, you must fix the patch after which try the garment on to be certain that the patch or the badge looks suitable in the place. If the patch needs a little readjustment you can accomplish it at this point easily.

Now thread the needle ensuring that the thread that you are currently using isn’t too long. Keep your thread within a length of approximately 18inches for easy maneuvering. In case your thread is just too long then you might get bothered by knots. When you have the thread ready make a knot at the end of the thread. You can thread a needle yourself by holding the non knotted end between your forefinger and thumb after which passing it through the eye of the needle. It’s also possible to get the help of a needle threader if you find threading a needle in this way difficult.

Pass the needle in the badge as well as the fabric ensuring that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you commenced stitching keeping this distance from the last stitch constantly. Continue stitching around the entire perimeter of the badge till you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread firmly to secure the knot and after that cut off any excess thread that’s left. Lastly take off extra safety pins that you were using to secure the patch into position.

You can also sew on badges with the aid of a sewing machine in case you don’t want to do the same manually. Decide on a thread that matched the colour of the patch after which tread your machine. It’s also possible to decide on a contrasting color with regards to the look which you want to present your badge. Once this is successfully done you have to start sewing you badge. Take advantage of the surface of the badge for your starting position and sew all along the edge of your badge utilizing the regular stitch mode ending in your kick off point. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for use with the badge.